Huawei IPC6131-WD-A - Configuring OSD Settings

Day/Night Scheduled-Switch
Day/Night scheduled-switch configuration interface enables you to set the separate camera
parameters for day and night to guarantee the image quality in different illumination.
Figure 8-23 Day/Night Scheduled-Switch Configuration Interface
Step 1 Click the time line to select the start time and the end time of the switch.
Step 2 Click Common tab to configure the common parameters applicable to the day mode and night
mode.
NOTE
The detailed information of each parameter please refers to day/night auto switch session.
Step 3 Click Day tab to configure the parameters applicable for day mode.
Step 4 Click Night tab to configure the parameters applicable for night mode.
NOTE
The settings saved automatically if any parameter is changed.
----End
8.5.2 Configuring OSD Settings
You can customize the camera name and time on the screen.
NOTE
The maximum on-screen display supports 320 pixels.
Step 1 Enter the OSD Settings interface: Configuration > Advanced Configuration > Image > OSD
Settings.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
90