l Exposure Settings
If the camera is equipped with the fixed lens, only Manual is selectable, and the iris mode
is not configurable.
If Auto is selected, you can set the auto iris level from 0~ 100.
For the camera supports P-Iris lens, if P-Iris lens is adopted, then the P-Iris lens type is
selectable, e.g.: Tamron 2.8-8mm F1.2 (M13VP288-IR), or if DC lens is adopted, then
manual and auto are selectable.
The exposure time refers to the electronic shutter time, which ranges from 1s~1/100,000s.
Adjust it according to the actual luminance condition.
l Focus Settings
For the camera supports electronic lens, you can set the focus mode as Manual or Auto. If
auto is selected, the focus is adjusted automatically, and if manual is selected, you can
control the lens by adjusting the zoom, focus, lens initialization, and auxiliary focus via the
PTZ control interface.
l Image Enhancement
– Digital Noise Reduction: DNR reduces the noise in the video stream. OFF, Normal
Mode and Expert Mode are selectable. Set the DNR level from 0~100, and the default
value is 50 in Normal Mode. Set the DNR level from both space DNR level [0~100]
and time DNR level [0~100] in Expert Mode.
– Defog Mode: You can enable the defog function when the environment is foggy and
the image is misty. It enhances the subtle details so that the image appears clearer.
– Electrical Image Stabilizer: EIS reduces the effects of vibration in a video.
– Grey Scale: You can choose the range of the grey scale as [0-255] or [16-235].
l Video Adjustment
– Mirror:It mirrors the image so you can see it inversed. Left/Right, Up/Down, Center,
and OFF are selectable.
– Rotate:To make a complete use of the 16:9 aspect ratio, and you can enable the rotate
function when you use the camera in a narrow view scene.
– When installing, turn the camera to the 90 degrees or rotate the 3-axis lens to 90 degrees,
and set the rotate mode as on, you will get a normal view of the scene with 9:16 aspect
ratio to ignore the needless information such as the wall, and get more meaningful
information of the scene.
NOTE
When enabling mirror or rotate function, the recording will be shortly paused.
– Scene Mode: Choose the scene as indoor or outdoor according to the real environment.
– Video Standard: 50 Hz and 60 Hz are selectable. Choose according to the different video
standards; normally 50 Hz for PAL standard and 60 Hz for NTSC standard.
– Capture Mode: It's the selectable video input mode to meet the different demands of
field of view and resolution.
l Other:
Some of the camera supports CVBS, SDI, or HDMI output. Please refer to the actual camera
model for details.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
89
To Next Page
Loading...
