9 Storage Settings
9.1 Configuring NAS Settings
The network disk should be available within the network and properly configured to store the
recorded files, log files, etc.
Add the network disk
Step 1 Enter the NAS (Network-Attached Storage) Settings interface: Configuration > Advanced
Configuration >Storage > NAS.
Figure 9-1 Add Network Disk
Step 2 Enter the IP address of the network disk, and enter the file path.
Step 3 Select the mounting type. NFS and SMB/CIFS are selectable. And you can set the user name
and password to guarantee the security if SMB/CIFS is selected.
NOTE
Please refer to the User Manual of NAS for creating the file path.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
9 Storage Settings
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
To Next Page
Loading...
