Huawei IPC6131-WD-A - Configuring Port Settings; Configuring Pppoe Settings

8.3.2 Configuring Port Settings
You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.
Step 1 Enter the Port Settings interface: Configuration > Basic Configuration >Network > Port. Or
Configuration > Advanced Configuration >Network > Port.
Figure 8-7 Port Settings
Step 2 Set the HTTP port, RTSP port and HTTPS port of the camera.
l HTTP Port: The default port number is 80, and can be changed to any port range 1024 to
65535.
l RTSP Port: The default port number is 554.
l HTTPS Port: The default port number is 443, and can be changed to any port range 1024 to
65535.
l Server Port: The default server port number is 8000.
Step 3 Click to save the settings.
NOTE
It asks for a reboot for the settings to take effect.
----End
8.3.3 Configuring PPPoE Settings
Step 1 Enter the PPPoE Settings interface: Configuration >Advanced Configuration >Network >
PPPoE.
Figure 8-8 PPPoE Settings
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76