Figure 8-21 ROI
Step 2 Draw the region of interest on the image. There are four regions can be drawn.
Step 3 Choose the stream type to set the ROI encoding.
Step 4 Choose the ROI type.
There are two options for ROI encoding, the fixed region encoding and the dynamic tracking.
The fixed region encoding is the ROI encoding for the manually configured area. And you can
choose the Image Quality Enhancing level for ROI encoding, and you can also name the ROI
area.
The dynamic region refers to the ROI defined by intelligent analysis such as human face
detection. You can choose the Image Quality Enhancing level for the ROI encoding.
Step 5 Click
to save the settings.
----End
8.5 Configuring Image Parameters
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
87
To Next Page
Loading...
