Huawei IPC6131-WD-A - Pole Mounting

NOTE
l Please loosen the screws slightly until you can adjust the camera and do not remove the screws from
the bracket.
l For some projects have strict demands on the water-proof, you may need to install a water-proof rubber
case (purchased separately) to the foldable position of the bracket to protect it from water. See the
figure below.
Figure 3-10 Install the Rubber Case
----End
3.2.4 Pole Mounting
NOTE
Note the pole must be able to withstand 3 times the weight of the camera, bracket and shield.
Step 1 Rotate the screws on the hoop anti-clockwise to loosen it.
Figure 3-11 Loosen the screws on the hoop
Step 2 Route the hoop through the hole of the installation plate.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11