Huawei IPC6131-WD-A - Configuring Network Settings; Configuring TCP;IP Settings

Figure 8-4 Time Sync Manually
NOTE
You can also check the Sync with computer time checkbox to synchronize the time of the camera
with that of your computer.
Step 4 Click the tab to enable the DST function and Set the date of the DST period.
Figure 8-5 DST Settings
Step 5 Click to save the settings.
----End
8.3 Configuring Network Settings
8.3.1 Configuring TCP/IP Settings
TCP/IP settings must be properly configured before you operate the camera over network. The
camera supports both the IPv4 and IPv6. Both versions may be configured simultaneously
without conflicting to each other, and at least one IP version should be configured.
Step 1 Enter TCP/IP Settings interface: Configuration > Basic Configuration >Network > TCP/
IP. Or Configuration > Advanced Configuration >Network > TCP/IP.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74