Figure 8-38 Alarm Output Settings
----End
8.6.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address conflicted
and illegal login to the cameras.
Step 1 Enter the Exception Settings interface: Configuration > Advanced Configuration> Events >
Exception.
Step 2 Check the checkbox to set the actions taken for the Exception alarm. Refer to Task 3: Set the
Alarm Actions for Motion Detection in 8.6.1 Configuring Motion Detection.
Figure 8-39 Exception Settings
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
102
To Next Page
Loading...
