Huawei IPC6131-WD-A - Ceiling Mounting with Gang Box

Step 7 Secure the camera with the supplied screws as shown below.
Figure 3-67 Secure the Camera
Step 8 Route the cables through the cable hole.
Step 9 Connect the video output connector to the monitor. Connect the power connector to the power
supply.
Step 10 Adjust the image and focus.
Step 11 Install the inner black liner back to the camera.
Step 12 Install the bubble back to the camera and secure it with screws as shown in Figure 3-67.
----End
3.6.3 Ceiling Mounting with Gang Box
Step 1 Disassemble the camera.
Step 2 Install the gang box in the ceiling.
Step 3 Attach the mounting base to the gang box with two screws.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide 3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45