Huawei IPC6131-WD-A - Configuring Display Settings

8.5.1 Configuring Display Settings
You can set the image quality of the camera, including brightness, contrast, saturation, hue,
sharpness, etc.
NOTE
The Display parameters vary depending on the camera model.
Step 1 Enter the Display Settings interface: Configuration > Basic Configuration> Image> Display
Settings or Configuration > Advanced Configuration> Image> Display Settings.
Step 2 Set the image parameters of the camera.
----End
NOTE
In order to guarantee the image quality in the different illumination, it provides two sets of parameters for
user to configure.
Day/Night Auto-switch
Figure 8-22 Display Settings of Day/night Auto-switch
l Image Adjustment
– Brightness describes bright of the image, which ranges from 1~100, and the default
value is 50.
– Contrast describes the contrast of the image, which ranges from 1~100, and the default
value is 50.
– Saturation describes the colorfulness of the image color, which ranges from 1~100, and
the default value is 50.
– Sharpness describes the edge contrast of the image, which ranges from 1~ 100, and the
default value is 50.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88