Step 3 Fix the dome drive to the wall bracket with the supplied screws.
Figure 3-61 Install the Camera
Step 4 Align the front cover to the dome drive and tighten the set screws on the front cover to complete
the installation.
Figure 3-62 Install the Front Cover
Step 5 Tear off the protection film softly to complete the installation.
NOTE
l Do not tear off the protection film until the installation is completed.
l Do not touch the inside face of the bubble with your hands.
----End
3.6 Installation of IPC6331-IR & 6311-IR Dome Camera
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
To Next Page
Loading...
