8.3.6 Configuring 802.1X Settings
The IEEE 802.1X standard is supported by the network cameras, and when the feature is enabled,
the camera data is secured and user authentication is needed when connecting the camera to the
network protected by the IEEE 802.1X.
Before you start, the authentication server must be configured. Please apply and register a user
name and password for 802.1X in the server.
Step 1 Enter the 802.1X Settings interface: Configuration > Advanced Configuration > Network >
802.1X.
Figure 8-13 802.1X Settings
Step 2 Check the Enable IEEE 802.1X checkbox to enable the feature.
Step 3 Configure the 802.1X settings, including EAPOL version, user name and password.
NOTE
The EAPOL version must be identical with that of the router or the switch.
Step 4 Enter the user name and password to access the server.
Step 5 Click to finish the settings.
NOTE
It asks for a reboot for the settings to take effect.
----End
8.3.7 Configuring QoS Settings
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Step 1 Enter the QoS Settings interface: Configuration >Advanced Configuration >Network >
QoS.
Figure 8-14 QoS Settings
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
80
To Next Page
Loading...
