Step 1 Click to edit the arming schedule. The Figure above shows the editing interface
of the arming schedule.
Step 2 Choose the day you want to set the arming schedule.
Step 3 Click to set the time period for the arming schedule.
Step 4 After you set the arming schedule, you can copy the schedule to other days (Optional).
Step 5 Click to save the settings.
NOTE
The time of each period can't be overlapped. Up to 4 periods can be configured for each day.
Figure 8-31 Arming Time Schedule
----End
Task 3: Set the Alarm Actions for Motion Detection
Check the checkbox to select the linkage method. Notify surveillance center, send email, upload
to FTP, trigger channel and trigger alarm output are selectable. You can specify the linkage
method when an event occurs.
Figure 8-32 Linkage Method
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
To Next Page
Loading...
