l Audible Warning
Trigger the audible warning locally.
l Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event occurs.
l Send Email
Send an email with alarm information to a user or users when an event occurs.
NOTE
To send the Email when an event occurs, you need to refer to 8.3.10 Configuring Email Settings
to set the related parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
NOTE
Set the FTP address and the remote FTP server first. Refer to 8.3.8 Configuring FTP Settings for
detailed information.
l Trigger Channel
The video will be recorded when the motion is detected. You have to set the recording
schedule to realize this function. Please refer to 9.2 Configuring Recording Schedule for
detailed information.
l Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
NOTE
To trigger an alarm output when an event occurs, please refer to 8.6.4 Configuring Alarm
Output to set the related parameters.
Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on area of each
area for different day/night switch.
Figure 8-33 Expert Mode of Motion Detection
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide 8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
97
To Next Page
Loading...
