Figure 8-29 Enable Motion Detection
Step 4 Click . Click and drag the mouse on the live video image to draw a motion
detection area.
Step 5 Click
to finish drawing.
NOTE
You can click to clear all of the areas.
Step 6 (Optional) Move the slider to set the sensitivity of the detection.
----End
Task 2: Set the Arming Schedule for Motion Detection
Figure 8-30 Arming Schedule
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide 8 Network Camera Configuration
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
To Next Page
Loading...
