NetCol5000-A 42 kW Air Cooled In-row Precision Air
Conditioner
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
If you perform this operation, all logs will be deleted, and device maintenance will be affected.
Exercise caution when doing this operation.
Procedure
Step 1 On the home screen, choose Maint > Log Maint > Delete Logs > Yes to delete all the logs.
After logs are deleted, the log deletion operation is recorded in the first log that is displayed.
----End
6.10 Exporting Data
Context
You can export data in one-click mode or by configurations. With the one-click mode, you
can export active alarms, historical alarms, run logs, and so on. The two export methods are
the same. This section uses one-click mode as an example to describe the export method.
You are advised to use the FAT32 USB flash drive with a capacity no greater than 64 GB.
Before using a USB flash drive, ensure that its data has been scanned by antivirus software
and is secure.
Before exporting active alarms, historical alarms, logs, and configurations, ensure that the USB flash
drive has been successfully identified. The position of the USB port is shown in Figure 2-6.
If the USB flash drive has been successfully identified, is displayed in the status bar.
If the USB flash drive is not properly connected, the system will display No USB device found.
during operations about the USB flash drive.
Procedure
Step 1 Tap Maint > USB Operations > Export to enter the Select Path screen, as shown in Figure
6-14.
To Next Page
Loading...
