Huawei UA5000 - Page 41

l The IP address of the maintenance terminal has been correctly configured. For the process
of configuring the IP address for the maintenance terminal, see Configuring the IP Address
of the Maintenance Terminal.
NOTE
In the following operations, the configuration of the UA5000 must be performed through the local serial
port.
Networking — LAN
Figure 3-11 shows the example network for inband management through telnet in a LAN.
Figure 3-11 Example network for inband management over a LAN in telnet mode
PC3
PC1
LAN
PC2
UA5000
ETH1
COM
0/4/0
PVMB
ETH0
Networking — WAN
Figure 3-12 shows the example network for inband management over a LAN in telnet mode.
Figure 3-12 Example network for inband management over a WAN in telnet mode
UA5000
ETH1
COM
0/4/0
Router
PC
PVMB
ETH0
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33