English - 24
2.1.4 Advanced
Autopassage: ON/OFF
Installation shape: Open, Normal, Complex
Calibration: Guide calibration, Tilt calibration
2.2 Ascertain the PIN code
If the PIN code for the robotic lawnmower is forgotten,
the right code can be found out. In the input mode for
PIN code, or when the main menu is displayed: Hold
down the 9 key for ve seconds, and a combination
of twelve letters and the mower’s serial number will then
be displayed.
If the mower is locked for a while due to an incorrectly
entered PIN code, you have to wait before making
another attempt before the letter combination can
be read.
The letter combination can be different at different
attempts on the same mower with the same PIN code.
Contact the national service organisation and state the
letter combination and serial number. They can then
identify the right PIN code.
Press BACK to exit the function.
2.3 Tools menu
In addition to the main menu selections which are
described in the Operator’s Manual, there is a further
one called Tools. The Tools menu includes the possibility
of testing a mower’s components and information about
different operating data.
To display the Tools menu:
1. Go to the main menu.
2. Press and simultaneously hold down the 7 and
9 keys for two seconds. An eighth main menu
selection then becomes available, illustrated
with an icon in the form of two cogwheels.
To hide the Tools menu:
1. Go to the main menu.
2. Press and simultaneously hold down the 7 and
9 keys.
The Tools menu will also disappear the next time the
main switch is turned off and on.
PIN code
Security code: MEPI DYHJ IIGF
Serial number: 130100001
Ensure to hide Tools before returning the
mower to the customer.
IMPORTANT INFORMATION
2. SPECIAL MENU FUNCTIONS
TH_1158203_310_315_GARDENA_US.indd 24 2016-05-11 10:16:02
To Next Page
Loading...
Need help?
General
