English - 80
6 Troubleshooting
The troubleshooting section consists of two main areas:
1. Messages
2. Symptoms
Each message and symptom is explained using one or more possible causes of the problem, followed by one
or more solutions.
First go through the basic and installation-related possible causes described in the following sections in this chapter.
Before further troubleshooting and component replacement is carried out, also perform the following actions:
1. Update the main program and the HMI program to the latest version. Many problems are solved
immediately by the new software. When the robotic lawnmower is connected to Autocheck EXP,
the Assistant noties if a newer software version is available.
2. Reset user settings in the mower by selecting Settings -> Reset all user settings, enter the PIN code and
press OK or from Autocheck EXP: Tools -> Reset all user settings.
Only if none of the above steps solve the problem, continued troubleshooting should be carried out and any
components replaced.
6. TROUBLESHOOTING
TH_1158203_310_315_GARDENA_US.indd 80 2016-05-11 10:16:43
To Next Page
Loading...
