English - 44
4 Autocheck Experience,
Service program
The Autocheck EXP service program is a tool to use
in connection with service of robotic lawnmowers from
Husqvarna. Its uses include:
• Updating software in the robotic lawnmower
• Troubleshooting the robotic lawnmower
• Reading information from the robotic
lawnmower
• Setting the robotic lawnmower
• Reading documents applicable to the robotic
lawnmower
Autocheck EXP is intended for robotic lawnmowers
from and including the 2003 model. The program does
not work on earlier models.
The robotic lawnmower is connected to the computer
using a service cable. There are 2 different cables:
• USB cable with service connector of a
standard USB type for Husqvarna G3 models
(e.g. Automower® 310/315 and GARDENA
R100Li, R100LiC,R130Li, R130LiC and
R160Li).
• USB cable with a special type of service
connector for Husqvarna Automower
®
G2 models (e.g. 220AC, 230 ACX, Solar
Hybrid and 265 ACX).
4.1 Installation and login
Autocheck EXP can only be installed on PC
computers. The program has been developed
and tested for the following operating systems:
Windows Vista (32 and 64 bits), Windows 7 (32 and
64 bits) and Windows 8 (32 and 64 bits). Compatibility
with other operating systems cannot be guaranteed.
The program uses a screen resolution of 1024 x 768.
When using screens with lower resolution full
functionality is not guaranteed.
4.1.1 Installing Autocheck EXP
1. Exit all open programs on your computer.
2. Insert the DVD with the service program into
the computer’s reader.
The installation program normally starts
automatically. If not, go to My Computer and
open it manually.
3. Follow the instructions given on screen.
4. AUTOCHECK EXPERIENCE, SERVICE PROGRAM
TH_1158203_310_315_GARDENA_US.indd 44 2016-05-11 10:16:12
To Next Page
Loading...
Need help?
General
