Hypertherm Powermax 85 Service Manual

Parts
7-26 powermax 65/85 Service Manual
Part number Description
228737 Kit: Powermax65/85/105 180° full-length machine torch/MRT positioning sleeve
228738 Kit: Powermax65/85/105 180° full-length machine torch/MRT removable gear rack replacement
228735 Kit: Powermax65/85/105 180° full-length/mini machine torch/MRT front mounting sleeve
228736 Kit: Powermax65/85/105 180° full-length/mini machine torch/MRT adapter ring (coupler)
228720 Kit: Duramax/MRT 180° machine and robotic torch cap-sensor switch replacement
228731 Kit: Powermax65/85/105 180° full-length/mini machine torch lead replacement,
7.6m(25ft)
228732 Kit: Powermax65/85/105 180° full-length/mini machine torch lead replacement,
10.7m(35ft)
228733 Kit: Powermax65/85/105 180° full-length/mini machine torch lead replacement,
15m(50ft)

Hypertherm Powermax 85 Specifications

General

Gas Supply	Clean, dry, oil-free air or nitrogen
Cooling Method	Fan-cooled
Input Voltage	200-600V, 3-phase
Current Output	25-85 A
Duty Cycle	60% @ 85 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Cutting Capacity (Recommended)	1" (25 mm)
Gas Type	Air/Nitrogen