You have gone through the PICs
without
resolving
your
problem.
The following steps should help
you
to find additional audio
or
visual symptoms.
1.
Check
the
entire system for loose
or
damaged connectors.
2.
Review
PIC
010,
"Start."
3. Select "Utilities" in the diagnostic menu, start an error log, and
select
"Run
tests multiple times." This will allow
you
to
exercise
the
machine thoroughly and identify
the
failing
symptom. When
you
have identified
the
symptom, go
to
PIC
010
"Start,"
or the appropriate
PIC
for
that
symptom
.
If
you
have followed these procedures and still have an unresolved
~roblem,
you
should seek technical assistance.
•
1100-5
To Next Page
Loading...
