Left Margin Sensor Removal
1.
Position Printer Power switch to
OFF;
unplug printer power
cord from wall outlet and disconnect Parallel Printer Cable.
2.
Remove forms.
3.
Remove forms rack (See page 3-56).
4. Remove access cover (See page 3-32).
5. Remove ribbon cartridge.
6.
Remove top cover (See page 3-88).
7.
Move carriage to right frame.
8.
Remove retaining screw III and retaining clip
m·
9. Unsolder three wires from left margin sensor.
10. Lift left margin sensor from printer.
!~
Left Margin
sensor~~
3-72
To Next Page
Loading...
