IBM 5150 Hardware Maintenance Manual

Base Cover Removal
1. Position Printer Power switch to OFF; unplug printer power
cord from wall outlet and disconnect Parallel Printer Cable.
2.
Remove forms.
,..-....,3.
Remove forms rack (See page 3-56).
4.
Remove access cover (See page 3-32).
5.
Remove top cover (See page 3-88).
6.
Remove power transformer (See page 3-74).
7.
Remove fuse-filter card/power cord (See page 3-60).
8.
Remove driver circuit card (See page 3-51).
9.
Remove control circuit card (See page 3-45).
10.
Remove print mechanism assembly (See page 3-80).
11.
Remove heat sink/power transistor assembly (See page 3-62).
12.
Base cover is now completely detached from other FRUs.
=
=
=
=
=
=
=
@
=
~~~~~ @
=
=
=
=
=
=
~~~~~~~~~ ~~~~~~~~ ~~~~~~~~ ~
o
=
3-33

IBM 5150 Specifications

General

Processor	Intel 8088
Clock Speed	4.77 MHz
RAM	16 KB - 256 KB
Manufacturer	IBM
Model	5150
Release Year	1981
Storage	5.25-inch floppy drives
Graphics	MDA or CGA
Operating System	IBM PC DOS
Ports	Cassette, keyboard
Expansion Slots	5