Diskette Drive "A" Removal
1.
Position System Unit Power switch to Off; unplug System Unit
power cord and disconnect all cables from rear
of
System Unit.
2.
Set the Display, Keyboard, and Printer away from System Unit
~.
work area.
3.
Remove System Unit cover (See page 3-98).
4.
Disconnect signal cable from Diskette Drive Printed
Circuit Board.
o o
e
e
e
5. Remove the two mounting screws on left side
of
Diskette
Drive
"A".
Mounting
Screws
'/
3-7
To Next Page
Loading...
