Carriage Belt Removal
1.
Position Printer Power switch to
OFF;
unplug printer power
cord from wall outlet and disconnect Parallel Printer Cable.
r'\2.
Remove forms.
3.
Remove forms rack (See page 3-56).
4.
Remove access cover (See page 3-32).
5.
Remove ribbon cartridge.
6.
Remove top cover (See page 3-88).
7.
Remove left front and right rear screws from carriage motor
mounts
•.
8.
Lift motor away from mounts to expose belt pulley iii.
3-37
To Next Page
Loading...
