Fuse-Filter Card/Power Cord Replacement
1.
Insert fuse-filter card into slot
II
in base cover.
2.
Insert strain relief into slot
m
in
base cover.
3.
Install screw
iii
into ground terminal
of
power cord.
r'\4.
Install screw
min center
of
fuse-filter card.
5.
Connect transformer primary
II
to fuse-filter card.
6.
Replace safety shield onto fuse-filter card.
7.
Replace top cover (See page 3-90).
8.
Replace access cover.
9.
Replace forms rack.
3-61
To Next Page
Loading...
