1.
Insert
your
Advanced Diagriostic diskette
or
cassette.
2.
Plug the System Unit power cord
into
a properly
functioning, grounded wall outlet.
3.
Position
the
System Unit Power switch
to
the On
position and listen for
the
power supply fan.
Note:
If
the system works properly except for the fan
not
running; replace the power supply (see Section 3, "Removal!
Replacement
").
IS THE POWER SUPPLY FAN RUNNING?
NO
Check the System Unit power cord for continuity
and replace
it
if
necessary. Go
to
PIC 020,
"Power".
YES
010-4
To Next Page
Loading...
