o -Run Test - Run a functional test
of
the installed devices.
I - Run Test Multiple Times - Repeats the functional test
as
a
many times
as
you choose.
2 - Utilities - The user has the option
of
choosing one
of
the
following from a utilities program:
Start Error Log
Stop Error Log
List Log
Set Time
of
Day
Display Time
of
Day
Retum
to
Main Menu.
Start and
Stop
Error Log - Enables the user to log the errors
that
the
diagnostics find. They can be
output
to diskette,
cassette,
or
printer.
List Log -
Will
display logged errors contained on cassette
tape
or
diskette.
Set
Time
of
Day - When the user selects this function and
sets the time
of
day, the machine will keep track
of
the
time and display it when asked to do so. However, when
the cassette player
is
used, the clock will stop until the
cassette player
is
no longer in
use.
Display Time
of
Day -
Will
display the time
of
day when
asked.
If
the system has been
tumed
off
since the set
time
of
day
was
used, the clock will restart
at
0 when
power
is
tumed
on.
The contents
of
the clock are constantly updated. The
value is set to 0 by the POST which means the clock
contains the time since POST was run. The contents may
be modified
by
the set time
of
day function.
9 - Exit Diagnostic Routines - Allows the user to exit the
utilities program and
retum
to the main menu.
YOU ARE
NOW
READY TO CHOOSE THE TYPE OF TEST
TO RUN, FOLLOW THE INSTRUCTIONS
ON
YOUR
DISPLAY.
CONTINUE
010-13
To Next Page
Loading...
