Compatibility Option 6:
Form Feed Command Position
FORM FEED COMMAND POSITION determines if the position of a form feed
command affects its execution.
v OFF (the default). Performs a form feed only if it occurs at the first print
position in a line or at Maximum Print Position +1. (The Maximum Print
Position is the line length.) A form feed command at any other position is
recognized as a blank.
v ON. Allows the printer to perform a form feed command anywhere in the data
stream.
Compatibility Option 7:
Automatic
Form Feed at End of Print Buffer
AUTOMATIC FORM FEED AT END OF PRINT BUFFER specifies whether or not
to perform an automatic form feed at the end of a print buffer.
v OFF (the default). Performs an automatic new line command after completing a
print buffer (unless a form feed, new line, or carriage return command was the
last one executed). The printer is set to print at print position 1 of the next line.
v ON. Performs an automatic form feed after completing a print buffer (unless a
form feed command was the last one in the buffer). The printer is set to print at
print position 1 of the first line of the next form.
Compatibility Option 8:
Automatic
FF After Operator-Initiated Copy
This option determines the print position after an operator-initiated local copy
(print screen function).
v OFF (the default). Performs an automatic new line command after completing a
print buffer (unless a new line, form feed or carriage return command was the
last one executed). The printer is set to print at print position 1 of the next line.
v ON. Performs an automatic form feed command unless a form feed was the last
one executed. The printer is set to print at print position 1 of the first line on the
next form.
88 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General