Saving Your Configuration in a Custom Set
Once you have changed all of the necessary parameters, it is recommended you
save them as a configuration that can be stored and loaded later for future use.
You can save your configurations to meet different print job requirements.
The saved configurations (called custom sets) are stored in NVRAM—they will not
be lost if you power off the printer.
Later, you can load one of the configurations for a specific print job. This
eliminates the need to change settings, such as CPI and LPI, for each new job. See
page 43 for details on loading configurations.
You may want to print records of your configurations (see page 24) and store them
in a safe place, such as inside the printer cabinet.
40 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General