CPI/LPI Select
Defines the default values for the horizontal and vertical character spacing. The
number of characters per inch can range from 10.0 through 17.1. The number of
lines per inch can range from 3.0 through 8.0.
CPI Select
v 10.0 CPI (the default)
v 12.0 CPI
v 13.3. CPI
v 15.0 CPI
v 16.7 CPI
v 17.1 CPI
Select LPI
v 6.0 LPI (the default)
v 3.0 LPI
v 4.0 LPI
v 8.0 LPI
Font Attributes
Typeface
Choose a typeface from the available options:
v Data Processing (the default). A general purpose font printing out at 120 dpi
horizontally and 72 dpi vertically. The width of the font will vary with each cpi.
v Gothic NLQ. A high quality font printing at 180 dpi horizontally and 96 dpi
vertically. This font has serifs and the width of the font varies with the cpi.
v Character Graphics.
v High Speed. A draft quality font printing at 120 dpi horizontally and 48 dpi
vertically. The width of the font varies with the cpi.
v Italics NQL.
v Courier NQL.
v OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
Chapter 4. The Configuration Menus 155
To Next Page
Loading...
Need help?
General