Ribbon End Point
v Normal (the default). The character life expectancy of the detected 6500 ribbon
type installed with an end point print contrast density of 0.5 for black inked
ribbons, or a similar representative value for colored or specialty ribbons.
v Lighter −1 The setting that allows the user to run a print contrast density of .44
for black inked ribbons, or a similar representative value for colored or specialty
ribbons
v Lighter −2 The setting that allows the user to run a print contrast density of .38.
v Lighter −3 The setting that allows the user to run a print contrast density of .32.
v Lighter −4 The setting that allows the user to run a print contrast density of .26.
v Lighter −5 The minimum setting that allows the user to run a print contrast
density of .2.
v Darker +3 The maximum setting that allows the user to run a print contrast
density of 0.8.
v Darker +2 The setting that allows the user to run a print contrast density of 0.7.
v Darker +1 The setting that allows the user to run a print contrast density of 0.6.
Ribbon Action
v Stop Ribbon End (the default). Stops ribbon action when ribbon life reaches 0%.
v Ignore Ribbon End When selected, the ribbon life display remains on the
control panel, and the printer continues to monitor ink consumption.
Chapter 4. The Configuration Menus 63
To Next Page
Loading...
