Antenna Diversity
The type of antenna used:
v Diverse (default). Select when you want to use the antenna with the best
reception.
v Primary. Select when you want to use the Primary antenna on the server.
v Auxiliary. Select when you want to use the Auxiliary antenna on the server.
Preamble
The length of the preamble in transmit packets.
v Default. The Wireless option automatically determines the length.
v Short. For newer printers which can handle higher transfer rate speeds.
v Long. For older printers which cannot handle higher transfer rate speeds.
Power Management
This allows you to set power-save mode and sleep time. A value specifying the
sleep time in milliseconds will be provided. If set to zero, power-save mode will be
disabled. The range includes:
v 0 ms. (default)
v 100 ms. -1000 ms.
Transmit Power
The power level as a percentage of full power (0 — 100%).
International Mode
When enabled, the Wireless option adapts to international frequency requirements
in Europe. The options include:
v Disable (default)
v Enable.
Authentication Method
This feature allows the user to select the authentication method used for the
wireless network interface.
v Open (the default). Selects open authentication.
v Shared. Selects shared key authentication.
v Kerberos. Selects Kerberos authentication (for use when a Symbol RF card is
installed).
v LEAP. Selects LEAP authentication (for use with a Cisco RF card installed).
Chapter 4. The Configuration Menus 121
To Next Page
Loading...
