Locking The Program Mode
When Program mode is locked, you cannot use the operator panel to change the
configuration settings. However, you can still select the configuration menus and
view the current configuration settings.
Press the Return + Enter keys at the same time to lock Program mode. The
following message will appear briefly:
OPERATOR MENU
LOCKED
Entering Program Mode
To place the printer in Program mode, press the MENU key.
Printing the Current Configuration
Step Key LCD Result Notes
1. Make sure the printer is on
2. Press
STOP
NOT READY The printer must be in NOT READY
mode to print the configuration.
3.
CONFIG
PRESS START TO PRINT
PRESS STOP TO EXIT
You are prompted to press the Start key
before the configuration prints.
4.
START
NOT READY Indicates that the configuration has
printed. Date and store the printout in a
safe place. You may also want to label
the printout (for example,
“Configuration for 2-up Labels”).
5.
START
READY The printer is READY for normal
operation.
24 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General