The second method for printing the current configuration, as well as several other
configurations, is to use the Print Custom Set Values menu option, shown on the
following page.
The Print Custom Set Values selection on the Configuration Management menu
allows you to print any or all of the configurations shown above. The default
setting, “Current Custom Set”, will print the same information as pressing the
Printer Configuration key. The Current Custom Set is the Power On configuration
until you begin modifying the printer configuration.
Custom sets 1 through 4 do not exist until you save configuration parameters to
them. You must define and save a custom set before you can print it.
Custom/Preload Sets 5 through 8 contain configuration sets that assist with the
installation and configuration of this printer.
The other options will only be useful once you have modified and saved the
printer configuration parameter settings.
The Power On Custom Set is defined by the “Change Power On Set” option.
Custom Sets 1 through 8 are defined by the “Save Current Values” option.
These options are described in detail under the Configuration Management Menu
description starting on page 64.
Chapter 3. Configuring the Printer 25
To Next Page
Loading...
Need help?
General