Power Stacker
This parameter determines whether or not the power paper stacker is enabled,
which is the default, or disabled. This parameter is not presented if the power
paper stacker is not installed.
v Enable (the default)
v Disable
Auto Elevator
This parameter exists only on printers with the power paper stacker installed. The
power stacker has a sensor which detects paper movement and raises the stacker
as the printed paper stack grows. If the printer has been printing for three minutes
continually and the sensor has not detected any growth in the paper stack, the
stacker raises itself ¼ inch automatically.
v Enable (default). The automatic elevator on the power stacker operates normally.
v Disable. The stacker does not raise automatically every three minutes and is
entirely dependent on the sensor. Disable is used with extremely high-quality
print jobs that take a long time to print.
Printer Management Port
Printer Management Port is the port used to connect the printer to the IBM Printer
Management Unit (PMU). This menu option is a printer management tool that
runs on Host Computers. The options include:
v Debug Ethernet (default)
v Debug Adapter
v Disable
v Serial
Top Exit Tear Distance
The eject distance for the EJECT/RESTORE type TOP EXIT TEAR.
v 7.46 Inches (default)
v 4.50 - 10.50 Inches
62 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General