IPDS Parameters
The IPDS parameters are described on the following pages. Parameters marked
with an asterisk (*) indicate the default value. The printer must be offline to enter
the configuration structure.
Enter and exit the IPDS configuration menu according to the configuration
procedures in Chapter 3, “Configuring the Printer,” on page 19. Pressing an invalid
key to enter a parameter value may move you to another level in the configuration
or exit the configuration menu completely.
BEFORE you reconfigure the IPDS, print a configuration sheet to see all of the
current settings. Refer to “Printing the Current Configuration” on page 24
Configure the IPDS according to your specific requirements. The IPDS
configuration menu is shown on the following page.
IPDS Configuration Menu
146 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General