Paper Specifications
The following paper specifications are general guidelines. Paper stock should be
tested with applications to determine print quality.
Paper
Type
v Edge-perforated, fan-fold, 3 to 17 inches (7.62 to 43.18 cm) wide*, 3 to 16 inches
with stacker, 2 to 24 inches (5.08 to 60.96 cm) long**, 5 to 12 inches with stacker.
v Single-part: 15 pound (57 g/m
2
) to 100 pound (377 g/m
2
) stock.
v Multi-part carbon: 1 to 6 part forms, maximum 12 pound (45 g/m
2
) ply of upper
plies.
v Multi-part carbonless, maximum of 6-part forms. Test readability of greater than
4-part forms.
v Recycled paper not recommended with stacker.
Sheet Thickness 0.025 inches (0.064 cm) maximum
Drive Adjustable tractors (6-pin engagement)
Slew Rate Fast Slow
6500-v05 12 ips 10.4 ips
6500-v5P 12 ips 10.4 ips
6500-v10 20 ips 10.4 ips
6500-v10 w/Stacker 20 ips 10.4 ips
6500-v1P 16 ips 10.4 ips
6500-v15 25 ips 10.4 ips
6500-v15 w/Stacker 25 ips 10.4 ips
6500-v20 w/Stacker 36 ips 18 ips
6500-v20 36 ips 18 ips
Appendix A. Printer Specifications 251
To Next Page
Loading...
Need help?
General