IGP Emulation Menu
Define CR Code (Carriage Return)
This parameter forces the printer to insert an automatic Line Feed code into the
data stream whenever a Carriage Return code occurs. This is to be used only if the
host computer does not send Line Feeds to the printer.
v CR = CR (the default). Does NOT perform a line feed. The next print position
will be print position 1 of the current line.
v CR = CR + LF. Performs an automatic line feed. The next print position will be
print position 1 of the next line.
162 Infoprint 6500 User’s Manual
To Next Page
Loading...
