Kerberos Password
v Kerberos Password (01 - 15). The first 15 characters of the Kerberos password
(maximum number of characters is 40).
v Kerberos Password (16 - 30). Characters 16 to 30 of the Kerberos password
(maximum number of characters is 40).
v Kerberos Password (31 - 40). Characters 31 to 40 of the Kerberos password
(maximum number of characters is 40).
Reset Kerberos Password
Resets the Kerberos password to an empty string.
KDC Port Number
KDC (Key Distribution Center) port number is the 2-byte UDP/TCP port used for
Kerberos Communication.
The range is 0-65535, and the factory default is 88.
Clock Skew
Sets the maximum allowable amount of time in seconds or minutes that Kerberos
authentication will tolerate before assuming that a Kerberos message is valid. The
range for Seconds is 60-900, and the default is 300. The range for Minutes is 1-15,
and the default is 5.
Ticket Lifetime
Sets the maximum allowable amount of time in Seconds, Minutes, Hours, or Days
that a ticket obtained from the Kerberos server is valid before getting a new one.
v Seconds. The range is 300-259200, and the default is 43200.
v Minutes. The range is 5-4320, and the default is 720.
v Hours. The range is 1-72, and the default is 12.
v Days. The range is 1-3, and the default is 1.
v Ticket Lifetime (Sec). The ticket lifetime unit in seconds. The default is 43200.
Renew Lifetime
Sets the maximum allowable amount of time in Seconds, Minutes, Hours, or Days
before warning that a new Kerberos password is needed.
v Seconds. The range is 0-604800, and the default is 0.
v Minutes. The range is 0-10080, and the default is 0.
v Hours. The range is 1-168, and the default is 0.
v Days. The range is 0-7, and the default is 0.
v Renew Lifetime Units. Renew lifetime unit in seconds. The range is 5-604800,
and the default is 0.
124 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General