Step Key LCD Results Notes
8.
PRINT DIRECTION
UNIDIRECTIONAL
Moves to the next available
option, the UNIDIRECTIONAL
option.
9.
ENTER
PRINT DIRECTION
UNIDIRECTIONAL*
Selects the displayed value. An
asterisk (*) appears indicating
that this choice is now the
active value.
10. Continue this pattern to make all of the changes, using the information in this chapter.
11. To save changes so that they will remain when the printer is reset or powered back
on, see “Saving Your Configuration in a Custom Set” on page 40. If you want to use
these values without saving, continue to the next step.
12.
STOP
NOT READY Returns the printer to the NOT
READY mode.
13.
OPERATOR MENU
LOCKED
Locks Program mode and the
Operator Menu.
14.
STOP
READY Places the printer in READY
mode, prepared for normal
operation.
Chapter 3. Configuring the Printer 39
To Next Page
Loading...
