Detailed information regarding the Ethernet IP Address, Gateway Address, Subset
Mask, and MAC Address capabilities can be found in the Ethernet Interface User’s
Manual. Access to the parameters is through the operator panel.
Buffer Size in Kbytes
This parameter determines the size of the input buffer, in 1K increments. A
selection of up to 16K is shown.
v 16K (default)
v 1 - 16
v NDS.
Novell Protocol
This option determines whether the Novell protocol will be available. The
selections are as indicated below:
v Enable (default). Makes the Novell protocol available with the Ethernet
installed.
v Disable. Makes the Novell protocol unavailable during printer operation.
Nest Serv Type
You can change the Nest Server using this option, but consult your administrator
for the appropriate setting.
The options are Auto (factory default), Bindery, and NDS.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be available. The
selections are as indicated below:
v Enable (the default). Makes the NetBIOS protocol available with the Ethernet
installed.
v Disable. Makes the NetBIOS protocol unavailable during printer operation.
Novell Frame
This selection determines which framing schemes will be used in processing
Novell signals.
v Auto Sensing (default)
v Ethernet II
v Ethernet 802.3
v Ethernet 802.2
v 802.2 Snap
Chapter 4. The Configuration Menus 111
To Next Page
Loading...
Need help?
General