Select Font
This parameter allows you to select a font for the IGP feature. Valid selections are
0 to 33. The following predefined values are available:
0 U.S. ASCII (the default)
1 German
2 Swedish
3 Danish
4 Norwegian
5 Finnish
6 English
7 Dutch
8 French
9 Spanish
10 Italian
11 Turkish
12 Japanese
13—23 Reserved
24—31 User Defined Sets
32 0858 PC Euro Multilingual
33 0923 Latin 9 8859–15
Values
14 - 23 are undefined and will default to 0. You can set values 24 - 31 to
specific fonts; refer to the USET command.
Slash 0
This option allows you to select is zeros will print with or without a slash (Ø).
v Disable (the default). Prints zeros without a slash (0).
v Enable. Prints zeros with a slash (Ø) to distinguish zeros from the alphabetical
capital “O”.
Lines Per Inch
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6-inch from the top of one print line to the top of the next print line. The
following number of lines per inch may be selected:
v 6 (the default)
v 8
v 9
v 10
Mono/Dual Case
This parameter enables the printer to print text in all uppercase when using the
ALPHA command.
v Dual Case (the default). The printer will print text in upper- and lowercase.
v Mono Case. The printer will print text in uppercase only.
164 Infoprint 6500 User’s Manual
To Next Page
Loading...
