Ignore Character
Ignore Mode: This parameter instructs the IGP to ignore the character selected
under the Select Character menu.
v Disable (the default). The IGP does not ignore any characters.
v Enable. The IGP ignores the characters selected under the Selected Character
menu.
Select
Character: This instructs the IGP which character to ignore from the host.
v 0 (the default)
v 0 - 255
IGP100 Compatibility
This option allows backward compatibility with older printer models. If you want
your new printer to emulate an older model, select from the following options:
v None (the default)
v MVP. Older printer model.
v L150. Older printer model.
v P3000. Older printer model.
v P6000. Older printer model.
v P9000. Older printer model.
Expanded Font
This option defines the type of expanded character the IGP/PGL will select. The
following choices are:
v Block (the default). These are block characters compatible with the IGP-X00
printers.
v Alt Block 1. This is a customized block character set that is only available for
the non-overlay multinational group of character sets.
v Scalable. These expanded characters have rounded edges.
Optimized Ratio
This option selects different bar code ratios for certain bar codes including Code 39
and interleaved 2 of 5. It is included for compatibility with IGP-X00 printers.
v Disable (the default). Use standard bar code ratios.
v Enable. Select the alternate bar code ratios.
166 Infoprint 6500 User’s Manual
To Next Page
Loading...
