Character Sets
Specifies a character set as shown in the “P-Series Emulation Menu” on page 182.
To use one of these sets, choose the desired group heading (such as 0862 Hebrew)
and press ENTER. Character sets are shown in detail in the Character Sets Reference
Manual.
Print Language
Print language specifies the set of print languages used by the printer. Refer to the
previous page for print language menus.
Control Code 06
Control Code 06 defines the function of ASCII code X'06' (ACK). You can select an
alternate line spacing of:
v 8.0 LPI (the default)
v 10.3 LPI
v 6.0 LPI
Control Code 08
Control Code 08 defines the function of ASCII code X'08' (BS). You can define the
code to output the following character:
v Elongated (the default)
v Backspace
Define CR Code (Carriage Return)
This option controls the action of the printer when it receives a Carriage Return
code (X'0D') from the host computer. If this feature is enabled, each time the
printer receives a carriage return, it inserts an additional Line Feed code (X'0A')
into the data stream. Do not use this feature if the host computer sends Line feeds
to the printer.
v CR = CR (the default). Does not insert an extra line feed after each carriage
return.
v CR = CR + LF. Inserts an extra line feed after each carriage return. The next
print position will be print position 1 of the next line.
Auto LF
This option defines the printer action when print data is received past the forms
width setting.
v Disable (the default). Discards any data past the forms width.
v Enable. Performs an automatic carriage return and line feed when data is
received past the forms width, causing the excess text to print on the next line.
184 Infoprint 6500 User’s Manual
To Next Page
Loading...
Need help?
General