Table 3. Firmware Error Codes. (continued)
Error Code Description Action / Possible Failing FRU
21F20xxx SCSI read/write optical. Refer to 21A00xxx for a description
and repair action for the xxx value.
22000001 Internal wrap test failed. Replace adapter.
22001001 Internal wrap test failed. Replace adapter.
22002001 Adapter failed to complete hardware
initialization.
Replace adapter.
22010001 Adapter failed to complete hardware
initialization.
Replace adapter.
22011001 Adapter failed to complete hardware
initialization.
Replace adapter.
25000000 Memory controller failed. Replace the system board.
25010xxx Flash Update Problem
25010000 No diskette in drive. Insert diskette containing firmware
image.
25010001 Diskette seek error. 1. Retry function.
2. Replace diskette drive.
3. Replace diskette cable.
4. Replace the system board.
Location: P1
(See notes on page 115.)
25010002 Diskette in drive does not contain an
*.IMG file.
Insert diskette with firmware update
file.
25010003 Cannot open OPENPROM package. Replace the system board.
Location: P1
(See notes on page 115.)
25010004 Cannot find OPENPROM node. Replace the system board.
Location: P1
(See notes on page 115.)
25010006 System ID does not match image system
ID.
Make sure correct firmware update
diskette is being used with this
system.
Chapter 5. Error Code to FRU Index
121
To Next Page
Loading...
