Table 2. Feature descriptions (continued)
Features
PC I/O
connectors
5 PC USB 2.0
2 RS-232 (9 pin)
1 Scanner (device specific RJ45)
1 MSR (device-specific RJ45)
1 Network (RJ45, Ethernet)
1 VGA (HD-15)
1 Microphone jack
1 PS/2 keyboard
2 Headphone jacks
Note: PS/2 keyboard port for diagnostic purposes only, not externally accessible
Power
system
v External 16 V DC 120 W AC adapter
Audio
v High-definition integrated audio
v Integrated 2 watts-per-channel stereo speakers
Wired LAN 10/100/1000 Ethernet
Wake on LAN enabled
Super I/O
controller
UART (universal asynchronous receiver/transmitter) support with SMSC semiconductor solution
Presence
sensor
Infrared presence detection
Security v Trusted Platform Module v 1.2
v Power on password
v Front USB port can be disabled in BIOS
v Tabletop mount with a Kensington security slot (K-Slot) and mounting holes. See Figure 2 on page
5.
v Capability for a customer supplied security screw to increase security of access doors
Modular
servicing
ease
Screwdriver access for the following:
v ExpressCard
v Hard disk drive
v Memory DIMMs
v Wireless card
v Flash drive
v Scanner
v Servicing the system
Introducing the IBM AnyPlace Kiosk
Chapter 1. Introducing the IBM AnyPlace Kiosk 3
To Next Page
Loading...
