Cleaning the touch screen
Keep the touch screen free from dirt and dust to allow the touch sensor to operate
efficiently. Follow these guidelines:
Note: Before cleaning the touch screen, power off the 4838 Anyplace Kiosk.
1. Use a soft, dry cloth (or non-abrasive microfiber cloth) with isopropyl
alcohol.
Attention: Do not apply cleaning solution directly to the screen.
Always spray the cleaner on a clean cloth and then wipe the screen.
Cleaning solutions containing abrasives,acids,ammonia or chlorine may
damage the screen or plastic housing.
2. Wipe gently across the surface.
3. Allow a few minutes for the surface to dry before using.
Diagnosing problems and troubleshooting
74
IBM AnyPlace Kiosk 4838
To Next Page
Loading...
