Optional features
Table 3. IBM AnyPlace Kiosk hardware options
Option Description
AnyPlace POS Hub Enables connection of USB (5 V, 12 V and 24 V) peripherals and a cash
drawer
Mass storage 3.5" Serial Advanced Technology Attachment (SATA) II, 80 GB
standard / 160 GB optional
Memory Two SO-DIMM (small outline dual in-line memory module),
DDR2 (double data rate two synchronous dynamic random access)
memory slots
Base memory size is 512 MB
Modular flash drive (MFD) 4 GB
Magnetic stripe readers (MSRs) ISO 3-track or JUCC
Bar code scanners Non-laser-based line scanner
Laser-based Omni scanner
Wireless LAN 802.11 a/b/g/ n-draft with integrated antennas
Note: The wireless solution is certified for use only in certain
countries. See Appendix C, “Notices,” on page 89.
Mounting options Tabletop mount
Wall mount
ExpressCard extended door Provides a "bubble" to cover and protect extended-length ExpressCards
Attention: Do not over tighten the plastic screws that are on the
extended door cover. Plastic screws only require one tenth (1/10th or
10%) as much torque as normal metal screws. Use a screw torque of
0.5 kg-cm / 0.05 N-m / 0.4 in-Lb / 7 in-oz.
AC adaptor bracket Powder-coated metal bracket that you can use to mount the AC
adaptor under a cabinet or on a wall
Configurations
Your sales representative can provide the latest available configurations.
Introducing the IBM AnyPlace Kiosk
4
IBM AnyPlace Kiosk 4838
To Next Page
Loading...
